SL-A-2200-3P 多点连杆锁
SL-A-2200-3P 为锌合金/不锈钢多点连杆锁，埋入式长面板旋转把手：一次旋动驱动上下锁杆，在高大柜门上实现两点/三点同步锁闭。可选挂锁。
- SKU : SL-A-2200-3P
相比单点锁闭，在门边两点或三点驱动显著提升高大宽门板的压紧力、抗振性与密封条压缩量。锁杆、导向件与端头按箱体型材配套，支持左右门方向与钥匙/工具锁芯选项。防护等级 IP65；符合 REACH No.1907/2006。
核心特性
材质: Zinc Alloy/SUS304
配置: Optional Padlock
防护等级: IP65
符合 REACH No.1907/2006
应用场景
电气柜与控制柜
通信与网络机柜
配电柜与开关设备
储能与新能源设备柜
户外箱体与工业设备门
自助设备与终端箱体
requestDrawing.title
requestDrawing.desc
相关行业
常见问题
查看全部→参考资料
- IEC 62208:2011, Empty enclosures for low-voltage switchgear and controlgear assemblies, International Electrotechnical Commission
- IEC 61373:2010, Railway applications — Rolling stock equipment — Shock and vibration tests, International Electrotechnical Commission
- IEC 60529:1989+A1+A2, Degrees of protection provided by enclosures (IP Code), International Electrotechnical Commission
操作指南
1. Start from the enclosure layout
Map the door height and hinge side first: multi-point rod locks serve tall low-voltage enclosure doors where a single latch cannot hold the edge flat.
2. Drive both rods with one handle
The flush long-panel swing handle drives upper and lower locking rods for synchronized two- or three-point clamping.
3. Pick the cylinder style
Key or tool cylinder options let the same body serve staffed panels and tool-only maintenance doors.
4. Order the zinc alloy body for indoor rows
The zinc alloy version with stainless internals covers general indoor service at lower cost than full stainless builds.
5. Confirm clamping on the gasket line
Driving the edge at multiple points increases clamping force and gasket compression; verify the door stays sealed at IP65.
订购与定制条款
| 起订量 100 件起 | 因产品而异，具体咨询 |
| OEM / ODM 100 件起 | 因产品而异 |
| 样品按实际费用提供 | 无库存约 25 天 |
| 现货 10–15 天 | 生产 15–20 天 |
| T/T 付款 · 24 小时出 PI |
需要按规格定制的工业锁具？
从打样到批量订单，我们的 OEM 团队准时交付可靠五金。