SL-A-2205-10 旋转把手锁
SL-A-2205-10 为塑料单点旋转把手锁，前置钥匙锁芯、背部单点锁舌——结构简洁、性价比高、外观整洁，适合一般工业柜门。
- SKU : SL-A-2205-10
埋入式长面板锁体与门面贴合，背部锁舌一次动作将门板压向门框。防护等级 IP65 防尘防水射流，适用于电气柜、控制柜、通信与配电柜、储能设备及发电机组门。符合 REACH No.1907/2006；安装尺寸见图纸。
核心特性
材质: Main body PA66+30GF
防护等级: IP65
符合 REACH No.1907/2006
应用场景
电气柜与控制柜
通信与网络机柜
配电柜与开关设备
储能与新能源设备柜
发电机组门
户外箱体与工业设备门
requestDrawing.title
requestDrawing.desc
常见问题
查看全部→参考资料
- IEC 60529:1989+A1+A2, Degrees of protection provided by enclosures (IP Code), International Electrotechnical Commission
- IEC 62208:2011, Empty enclosures for low-voltage switchgear and controlgear assemblies, International Electrotechnical Commission
- Regulation (EC) No 1907/2006, concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), European Union
操作指南
1. Cover general doors at low cost
A simple, cost-effective, clean-looking lock for general industrial cabinet doors, with a front key cylinder and rear tongue.
2. Operate the front cylinder directly
The front key cylinder drives the rear tongue for single-point closure.
3. Keep the flush face tidy
The flush long-panel body sits flat against the door.
4. Draw the panel in one motion
The rear tongue draws the panel to its frame in one motion.
5. Seal the standard fleet
Rated IP65 for electrical enclosures, control cabinets, communication and distribution cabinets, energy storage equipment, and generator doors; REACH No.1907/2006 compliant.
订购与定制条款
| 起订量 100 件起 | 因产品而异，具体咨询 |
| OEM / ODM 100 件起 | 因产品而异 |
| 样品按实际费用提供 | 无库存约 25 天 |
| 现货 10–15 天 | 生产 15–20 天 |
| T/T 付款 · 24 小时出 PI |
需要按规格定制的工业锁具？
从打样到批量订单，我们的 OEM 团队准时交付可靠五金。