SL-A-2205-1P 旋转把手锁
SL-A-2205-1P 为塑料单点旋转把手锁，前置钥匙锁芯、背部单点锁舌——结构简洁、性价比高、外观整洁，适合一般工业柜门。
- SKU : SL-A-2205-1P
埋入式长面板锁体与门面贴合，背部锁舌一次动作将门板压向门框。防护等级 IP65 防尘防水射流，适用于电气柜、控制柜、通信与配电柜、储能设备及发电机组门。符合 REACH No.1907/2006；安装尺寸见图纸。
核心特性
材质: Main body PA66+30GF
防护等级: IP65
符合 REACH No.1907/2006
应用场景
电气柜与控制柜
通信与网络机柜
配电柜与开关设备
储能与新能源设备柜
发电机组门
户外箱体与工业设备门
requestDrawing.title
requestDrawing.desc
常见问题
查看全部→参考资料
- IEC 62262:2002+A1:2021, Degrees of protection against external mechanical impacts (IK code), International Electrotechnical Commission
- IEC 60529:1989+A1+A2, Degrees of protection provided by enclosures (IP Code), International Electrotechnical Commission
- IEC 62208:2011, Empty enclosures for low-voltage switchgear and controlgear assemblies, International Electrotechnical Commission
操作指南
1. Standardize budget rows on one body
The -1P variant keeps the same simple plastic body for whole rows of general industrial cabinets.
2. Open with the front cylinder
The front key cylinder and rear tongue close single-point in one motion.
3. Let the polymer face absorb knocks
The plastic body takes routine impact without denting or corrosion.
4. Keep the flush look
The flush long-panel body sits flat against the door.
5. Hold the outdoor rating
Rated IP65 for electrical enclosures, control cabinets, communication and distribution cabinets, energy storage equipment, and generator doors; REACH No.1907/2006 compliant.
订购与定制条款
| 起订量 100 件起 | 因产品而异，具体咨询 |
| OEM / ODM 100 件起 | 因产品而异 |
| 样品按实际费用提供 | 无库存约 25 天 |
| 现货 10–15 天 | 生产 15–20 天 |
| T/T 付款 · 24 小时出 PI |
需要按规格定制的工业锁具？
从打样到批量订单，我们的 OEM 团队准时交付可靠五金。