SL-B-2704 按钮撞击锁
SL-B-2704 为钥匙操作撞击锁，方形四孔安装底座，专为金属柜与抽屉柜设计：推门锁舌自动卡入，插入钥匙旋转释放。刚性底座保证钢制箱体上的安装对中。
- SKU : SL-B-2704
SL-B-2704 将钥匙撞击锁装在方形四孔底座上，为反复撞击的金属抽屉面板与柜门设计，锁体不扭转松动。
推入即锁，仅钥匙可开；方形底座将撞击载荷分散到四个固定点，薄板金前面板保持方正对齐。
锌合金机体为日常工业使用设计，符合 REACH No.1907/2006。
单螺母后装锁会打转的抽屉柜、控制箱、电气柜与拖车工具箱选 -2704。起订量灵活，适配更换计划与 OEM 批量。
核心特性
撞击卡入，钥匙释放
方形四孔底座刚性安装
锌合金本体适配金属柜
材质: Zinc Alloy
合规: REACH No.1907/2006
应用场景
电气箱体与通信柜小门
抽屉柜与控制箱
工业设备检修门
拖车工具箱与皮卡工具箱
requestDrawing.title
requestDrawing.desc
常见问题
查看全部→参考资料
- IEC 61373:2010, Railway applications — Rolling stock equipment — Shock and vibration tests, International Electrotechnical Commission
- Regulation (EC) No 1907/2006 (REACH), European Union
- IEC 62262:2002+A1:2021, Degrees of protection against external mechanical impacts (IK code), International Electrotechnical Commission
操作指南
1. Stop the lock twisting loose
The keyed slam lock mounts on a square four-screw base made for metal drawer fronts that take repeated slamming without letting the lock twist loose.
2. Push, snap, and only the key opens
Push the drawer and the tongue snaps into the keeper; only the key releases it.
3. Spread the impact over four fixings
The square base spreads the impact load across four fixing points so thin sheet-metal fronts stay square and aligned.
4. Replace spinning single-nut locks
Pick it for drawer cabinets, control boxes, and electrical enclosures where a single rear-nut lock would spin loose.
5. Confirm daily-duty compliance
The zinc alloy body is made for daily industrial service and complies with REACH No.1907/2006.
订购与定制条款
| 起订量 100 件起 | 因产品而异，具体咨询 |
| OEM / ODM 100 件起 | 因产品而异 |
| 样品按实际费用提供 | 无库存约 25 天 |
| 现货 10–15 天 | 生产 15–20 天 |
| T/T 付款 · 24 小时出 PI |
需要按规格定制的工业锁具？
从打样到批量订单，我们的 OEM 团队准时交付可靠五金。