SL-E-4222-100-A1 工业拉手
SL-E-4222-100-A1 为镜面抛光不锈钢管状拉手，孔距 100 mm，正面螺栓螺母贯穿 6.7 mm 孔固定：经典圆管握持造型，适合要求耐蚀与整洁外观的柜门与机械门。
- SKU : SL-E-4222-100-A1
工业拉手为操作人员提供整手握持，用于开启工业设备的门、盖板与抽屉。管状与条形结构覆盖多种孔距与安装方式——内螺纹隐藏安装外观整洁，穿板螺栓固定强度更高。安装尺寸见图纸。
核心特性
材质: Stainless Steel
表面处理: Mirror Polishing
安装方式: Bolt and Nut
固定孔: 6.7mm通孔安装
应用场景
电气柜与控制柜
机床与工业机械设备
特种车辆——房车、救护车与工程服务车
requestDrawing.title
requestDrawing.desc
常见问题
查看全部→参考资料
- ISO 9227:2022, Corrosion tests in artificial atmospheres — Salt spray tests, International Organization for Standardization
- IEC 62262:2002+A1:2021, Degrees of protection against external mechanical impacts (IK code), International Electrotechnical Commission
- IEC 62208:2011, Empty enclosures for low-voltage switchgear and controlgear assemblies, International Electrotechnical Commission
操作指南
1. Choose through-bolt fixing for maximum strength
Face bolt-and-nut mounting through 6.7 mm holes gives maximum strength where doors see heavy daily pulling.
2. Confirm the 100 mm centers
The 100 mm hole centers match the common cabinet pattern; verify against the drawing before drilling.
3. Fit the mirror-polished stainless tube
The classic round-grip tube suits cabinet and machinery doors where corrosion resistance and a clean look are required.
4. Rate the tube for the environment
Confirm the stainless tube against salt-spray exposure on corrosive sites.
5. Serve switchgear and machinery rows
Pull handles of this class equip electrical cabinets and machinery doors across the enclosure fleet.
订购与定制条款
| 起订量 100 件起 | 因产品而异，具体咨询 |
| OEM / ODM 100 件起 | 因产品而异 |
| 样品按实际费用提供 | 无库存约 25 天 |
| 现货 10–15 天 | 生产 15–20 天 |
| T/T 付款 · 24 小时出 PI |
需要按规格定制的工业锁具？
从打样到批量订单，我们的 OEM 团队准时交付可靠五金。