SL-A-2226 多点连杆锁
SL-A-2226 为 L 型把手多点连杆锁：L 形长把手提供更大力臂，戴手套或湿手也能轻松操作，驱动垂直锁杆实现大型柜门的多点锁闭。
- SKU : SL-A-2226
相比单点锁闭，在门边两点或三点驱动显著提升高大宽门板的压紧力、抗振性与密封条压缩量。锁杆、导向件与端头按箱体型材配套，支持左右门方向与钥匙/工具锁芯选项。防护等级 IP65；符合 REACH No.1907/2006。
核心特性
材质: Zinc Alloy/SUS304
配置: Optional Padlock
防护等级: IP65
符合 REACH No.1907/2006
应用场景
电气柜与控制柜
通信与网络机柜
配电柜与开关设备
储能与新能源设备柜
户外箱体与工业设备门
自助设备与终端箱体
requestDrawing.title
requestDrawing.desc
常见问题
查看全部→参考资料
- IEC 60529:1989+A1+A2, Degrees of protection provided by enclosures (IP Code), International Electrotechnical Commission
- IEC 61373:2010, Railway applications — Rolling stock equipment — Shock and vibration tests, International Electrotechnical Commission
- IEC 62262:2002+A1:2021, Degrees of protection against external mechanical impacts (IK code), International Electrotechnical Commission
操作指南
1. Give gloved hands real leverage
The L-shaped long handle gives extra leverage for gloved or wet-hand operation on large enclosure doors.
2. Drive vertical rods for edge clamping
The handle drives vertical rods for multi-point locking that clamps the door edge at two or three points.
3. Cover large doors that single latches miss
Multi-point clamping adds clamping force, vibration resistance, and gasket compression on tall or wide panels.
4. Fit the fleet with matched hardware
Rods, guides, and end fittings match the enclosure profile, with left- or right-hand orientation and key or tool cylinder options.
5. Verify the IP65 seal in service
The lock is rated IP65; re-check rod adjustment after transport vibration so the gasket line stays compressed.
订购与定制条款
| 起订量 100 件起 | 因产品而异，具体咨询 |
| OEM / ODM 100 件起 | 因产品而异 |
| 样品按实际费用提供 | 无库存约 25 天 |
| 现货 10–15 天 | 生产 15–20 天 |
| T/T 付款 · 24 小时出 PI |
需要按规格定制的工业锁具？
从打样到批量订单，我们的 OEM 团队准时交付可靠五金。