SL-J-2601 卫生级紧固件
SL-J-2601 为 SUS316L 卫生级密封螺母，封闭圆顶与光滑过渡防止积水、积尘与污染附着外露螺纹；底部蓝色密封圈贴合安装面形成密封——防护最高可达 IP69K，视装配结构与密封压缩量而定。
- SKU : SL-J-2601
卫生级紧固件消除常规螺栓螺母积存物料残渣与清洗液的缝隙。光滑圆角几何支持在位清洗与冲洗流程；SUS316L 与 HNBR 密封件耐受常见清洗剂。最终防护等级取决于安装后的接合状态——请在实际应用中测试确认。
核心特性
防护等级：最高 IP69K（视安装结构而定）
应用场景
食品加工与乳制品机械
制药与洁净室设备
饮料灌装线与肉类加工设备
高压冲洗区域
requestDrawing.title
requestDrawing.desc
相关行业
常见问题
查看全部→参考资料
- ISO 14159:2002, Safety of machinery — Hygiene requirements for the design of machinery, International Organization for Standardization
- IEC 60529:1989+A1+A2, Degrees of protection provided by enclosures (IP Code), International Electrotechnical Commission
- ASTM B117-19, Standard Practice for Operating Salt Spray (Fog) Apparatus, ASTM International
操作指南
1. Cap exposed threads hygienically
The closed dome and smooth transitions keep water, dust, and residue off exposed threads.
2. Seal against the mounting surface
The blue sealing ring at the base seals against the mounting surface - protection up to IP69K depending on assembly structure and sealing compression.
3. Support clean-in-place routines
Smooth, rounded geometries support clean-in-place and washdown routines where conventional nuts trap debris.
4. Choose SUS316L for the washdown line
SUS316L resists common cleaning agents; confirm the body against salt-spray exposure on coastal or chemical-adjacent plants.
5. Test the installed joint
Final ingress protection depends on the installed joint - confirm by test in the application.
订购与定制条款
| 起订量 100 件起 | 因产品而异，具体咨询 |
| OEM / ODM 100 件起 | 因产品而异 |
| 样品按实际费用提供 | 无库存约 25 天 |
| 现货 10–15 天 | 生产 15–20 天 |
| T/T 付款 · 24 小时出 PI |
需要按规格定制的工业锁具？
从打样到批量订单，我们的 OEM 团队准时交付可靠五金。