SL-B-2506 闸板门锁
SL-B-2506 在不锈钢埋入式闸板撞击锁前面板集成钥匙锁芯：撞击即锁，扳动闸板释放；背部可由单点扩展为多点连杆，适配更高的车门。
- SKU : SL-B-2506
SL-B-2506 在不锈钢齐平平板撞击锁前部增加钥匙控制：摔门即锁、扳动平板释放，后部可从单点扩展为多点连杆联动。
前部钥匙锁芯决定谁能开门，后部扩展连杆接入上下拉杆，为高大门板提供均匀多点保持；齐平平板外观无凸出挂点。
全 SUS304 不锈钢机体耐户外使用，符合 REACH No.1907/2006。
服务车舱门、房车储物门与长型拖车工具箱——需要钥匙安全加多点均匀保持的场合指定 -2506。起订量灵活，覆盖样品与车队改装。
核心特性
前置钥匙锁芯管控权限
背部可扩展多点连杆
材质: SUS304
合规: REACH No.1907/2006
应用场景
拖车工具箱与皮卡工具箱
特种车辆与服务车舱门
房车储物舱与设备舱门
工程车辆舱门与服务舱
户外箱体与设备柜
requestDrawing.title
requestDrawing.desc
常见问题
查看全部→参考资料
- ISO 20653:2023, Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment, International Organization for Standardization
- ISO 16750-3:2023, Road vehicles — Environmental conditions — Part 3: Mechanical loads, International Organization for Standardization
- Regulation (EC) No 1907/2006 (REACH), European Union
操作指南
1. Control access from the front cylinder
The keyed cylinder at the front decides who opens the door, while slam-to-close locking keeps daily operation key-free.
2. Toggle the paddle to release
Toggle the paddle to release the latch after unlocking.
3. Expand to multi-point as the door grows
The rear expands from single-point into multi-point rod linkage, tying into upper and lower rods for tall panels that would bow under a single latch.
4. Keep the outside snag-free
The flush paddle keeps the exterior clean on service vehicle compartments and long trailer toolboxes.
5. Rely on the stainless body outdoors
The all-SUS304 body stands up to outdoor service and complies with REACH No.1907/2006.
订购与定制条款
| 起订量 100 件起 | 因产品而异，具体咨询 |
| OEM / ODM 100 件起 | 因产品而异 |
| 样品按实际费用提供 | 无库存约 25 天 |
| 现货 10–15 天 | 生产 15–20 天 |
| T/T 付款 · 24 小时出 PI |
需要按规格定制的工业锁具？
从打样到批量订单，我们的 OEM 团队准时交付可靠五金。