SL-6001 Rotary Latch Guide and Keeper
The SL-6001 is a snap-in PA66+30GF guide and keeper for rotary, slam and push-to-close latches: it positions the latch, compensates misalignment and reduces closing noise on light to medium-duty doors.
- SKU : SL-6001
The SL-6001 is a snap-in guide and keeper in glass-fiber reinforced PA66+30GF, designed to work with rotary latches, slam (impact) door locks and push-to-close latches. Its molded guiding ramp steers the latch tongue or striker into the closed position, compensates minor misalignment between door and frame, and cushions the final contact: metal impact noise and panel rattle drop noticeably, and the latch seats consistently even when the panel is not perfectly adjusted.
Installation needs no screws: the keeper presses into the panel cutout and locks in place, and a cable tie down anchors the mating side. The 4 mm applicable diameter suits light to medium-duty doors. The black PA66+30GF body complies with UL and RoHS requirements.
Key Features
Snap-in installation: presses into the panel cutout, no screws or tools required
PA66+30GF glass-fiber reinforced body: stiff, wear-resistant guiding surface
Guiding ramp compensates door-to-frame misalignment and positions the latch
Cushions the closing contact: reduces metal impact noise and panel rattle
Cable tie down attachment, 4 mm applicable diameter
Complies with UL and RoHS requirements
Applications
RV storage compartments
Trailer toolboxes
Vehicle access doors
Outdoor equipment boxes
Lightweight maintenance doors
Light to medium-duty equipment door panels
requestDrawing.title
requestDrawing.desc
Frequently Asked Questions
View All→References
- ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps, International Organization for Standardization
- Directive 2011/65/EU (RoHS), European Union
- IEC 62262:2002+A1:2021, Degrees of protection against external mechanical impacts (IK code), International Electrotechnical Commission
How To
1. Snap the keeper into the panel cutout
Installation needs no screws: the keeper presses into the panel cutout and locks in place, and a cable tie down anchors the mating side.
2. Let the ramp steer the striker home
The molded guiding ramp steers the latch tongue or striker into the closed position and compensates minor misalignment between door and frame.
3. Cushion the final contact
The PA66+30GF body cushions the final contact: metal impact noise and panel rattle drop noticeably.
4. Pair it with rotary, slam, or push-to-close latches
The keeper works with rotary latches, slam (impact) door locks, and push-to-close latches on light to medium-duty doors.
5. Confirm material compliance for the build
The glass-fiber reinforced body complies with UL and RoHS requirements; validate UV and weathering exposure for outdoor service.
Ordering & customization terms
| MOQ from 100 pcs | details by product — ask us |
| OEM / ODM from 100 pcs | varies by product |
| Samples at actual cost | ~25 days if not in stock |
| Stock 10–15 days | production 15–20 days |
| T/T · PI in 24 h |
Need industrial locks built to your spec?
From prototype to volume order, our OEM team delivers reliable hardware on time.